How to Use the AR Blue Clean AR383: A Comprehensive Guide

Welcome to your ultimate guide on how to effectively use the AR Blue Clean AR383 pressure washer. Whether you’re a seasoned pro or a beginner, this detailed guide will walk you through the ins and outs of this powerful cleaning tool. Let’s dive in!

Unboxing and Initial Inspection

Upon receiving your AR Blue Clean AR383, it’s essential to inspect the package for any damages. Once you’ve confirmed that everything is in good condition, carefully remove the unit from the box. Here’s a quick checklist to help you get started:

• Check for any visible damages to the unit or its components.
• Ensure that all parts are included, such as the pressure washer, spray gun, wand, and hose.
• Inspect the power cord and ensure it’s in good condition.

Once you’ve confirmed that everything is in order, it’s time to move on to the setup process.

Setting Up the AR Blue Clean AR383

Before you can start using your AR Blue Clean AR383, you’ll need to set it up. Here’s a step-by-step guide to help you through the process:

1. Attach the spray gun to the pressure washer. Ensure that it’s securely fastened.
2. Connect the wand to the spray gun. Again, make sure it’s tight and secure.
3. Attach the hose to the wand. The hose should be securely connected to both the wand and the pressure washer.
4. Connect the power cord to the pressure washer. Make sure the cord is plugged into a grounded outlet.
5. Fill the pressure washer with water. The fill cap is typically located on the top of the unit.
6. Check the oil level. If necessary, add oil to the engine. The oil level should be between the minimum and maximum marks on the dipstick.

With the AR Blue Clean AR383 set up, you’re now ready to start cleaning.

Using the AR Blue Clean AR383

Now that your AR Blue Clean AR383 is ready to go, it’s time to put it to work. Here are some tips to help you get the most out of your pressure washer:

Adjusting the Pressure

The AR Blue Clean AR383 features a pressure adjustment dial, allowing you to customize the pressure output for different cleaning tasks. Here’s how to adjust the pressure:

1. Locate the pressure adjustment dial on the side of the pressure washer.
2. Turn the dial to the desired pressure setting. The higher the setting, the more powerful the cleaning action will be.
3. For delicate surfaces, such as siding or windows, use a lower pressure setting. For tougher jobs, like concrete or brick, a higher pressure setting may be necessary.

Using the Spray Gun and Wand

The spray gun and wand are the primary tools for cleaning with your AR Blue Clean AR383. Here’s how to use them effectively:

1. Grasp the spray gun with both hands and aim it at the surface you want to clean.
2. Press the trigger to activate the pressure washer. The water will be propelled from the nozzle at high pressure.
3. Move the spray gun in a sweeping motion to cover the entire surface. Avoid holding the nozzle in one spot for too long, as this can damage the surface.
4. For tough stains or dirt, use a more concentrated stream by aiming the nozzle directly at the problem area.

Using Detergents and Chemicals

While the AR Blue Clean AR383 is a powerful cleaning tool on its own, using detergents and chemicals can enhance its cleaning capabilities. Here’s how to use them:

1. Attach a soap applicator to the spray gun.
2. Fill the soap applicator with your chosen detergent or chemical.
3. Adjust the pressure to a lower setting for applying soap or chemicals.
4. Apply the soap or chemical to the surface you want to clean, then use the pressure washer to rinse it off.

Cleaning Tips and Tricks

Here are some additional tips and tricks to help you get the most out of your